For Windows 7/8/10

For FG Series Triaxial Inclinometer

BWSENSING Debug Software is suitable for most BWSENSING products.

Note: This software does not support Modbus, Please read the following instructions carefully for your Modbus products.

If you have a Modbus sensor in your hand, we have two solutions here:

1. Download and use our BWSENSING Modbus Debug Software

2. Open the Debug Software Ver. 3.0.3, click COM Debug, in Send's dialog, Enter 770500530058  and click the send button within 10 seconds after power on the sensor, this code force him to use a compatible protocol, so that you can continue to use the BWSENSING Debug software Ver. 3.0.3

Note: Please Enter that code and send it within 10 seconds after power on your sensor.

BWSENSING Debug Software is easy to use and very powerful. You can use it to do 3D Demo, set and store various parameters of the sensor, set the alarm angle of the tilt switch, quick calibration of electronic compass, etc. More functions and fun waiting for you to discover.

Including analog output sensors (with RS232), for example, you can change the measuring range of your analog output inclinometer very easily.

If there is any question, please feel free to tell us.

Product description:

This software is used for serial port communication debugging.

Update:

The calculation method of the frequency of data receiving.

If you have other question, you can contact us directly.

Product description:

This is a software kit, which is used for auxiliary sensors.

Update:

Optimize the data storage timestamp accuracy and the model smoothness.

There are two ways to access BWSENSING products:

1. Use the “Serial debugging assistant of general protocol”, and then choose the right protocol to access your product:

Ps: When you use Bewis modbus debug software, you should set up the right Port number and Baud rate (Default: 9600), and the transmission and receiving of the data will be showed in hexadecimal format.

2. Make use of the management software to access:

    Specific operation steps:

    a. Download ”BWSENSING Modbus Debug Software”, and then double click to install.

    b. After the installation is complete, double-click on the desktop "Bewis Modbus Debug Software" shortcut to enable the software.

    c. The first time you use the software, you need to install a plug-in, please follow its steps to install.

    d. After opening the software, you should choose the right Port number and Baud rate, and then you will be able to manage your sensor.

If you have other question, you can contact us directly.

commix1.4 is a very powerful programmable controller serial port debugging software. The software has a clean and refreshing UI user interface, which can help users perform multi-ary mixed debugging, and can be widely used in communication and debugging in the field of industrial control

1. After the serial port is opened, the communication parameters can be modified at any time. Except for the baud rate, which needs to be clicked to apply, the others will be automatically applied. For combinations that are not supported by the computer, there will be a prompt

2. Input HEX: User input data is treated as hexadecimal bytes, case insensitive

Input ASC: user input data as ASCII characters

Display HEX: The received data is displayed as hexadecimal bytes

Display ASC: The received data is displayed as ASCII characters

Ignore space input: Whether to ignore spaces in user input data

Automatic line break: Whether to automatically wrap the line between the received and sent data

Display interval: Whether to display the interval time from the end of the sending to the receipt of the response

DTR/RTS: After selected, the corresponding pin becomes high level, which is used for some passive 485/422 converters

3. When inputting in HEX and ASCII modes, escape character input is valid

4. In ASCII mode, characters from 20h to 7Eh are displayed directly, and other characters are displayed as escape characters

5. Select "Enter to send", and press Enter in the input area is equivalent to pressing the send button. If you want to input multiple lines, you can use Ctrl+Enter; if you don't select it, you can use Enter to branch in the input area

6. The data input by the user (output from the serial port) is displayed in green, the data input from the serial port is displayed in blue, and the interval time (milliseconds) between sending and receiving is displayed in gray

7. The program can be used in the simplest 3-wire system (serial port 2 receiving, 3 sending, 5 ground) communication. In fact, most industrial control equipment only use these 3 communication signals at present, and the active 232 to 485/422 converter is convenient. so so

8. Click the ... menu icon to choose to save the communication data or parameter settings as a file

9. When the program ends, the current settings are automatically saved to the registry

Serial communication interface debugging software

For BWM826, BWN826, BWN426 use ONLY